Download
Share
Print this page
Extron electronics DTP3 T 311 User Manual
  1. Manuals
  2. Brands
  3. Extron electronics Manuals
  4. Transmitter
  5. DTP3 T 311
  6. User manual
Extron electronics DTP3 T 311 User Manual

Extron electronics DTP3 T 311 User Manual

Hdmi twisted pair transmitter and receiver
Hide thumbs Also See for DTP3 T 311:

Advertisement

Quick Links

Download this manual
DTP3 T/R 311
HDMI Twisted Pair Transmitter and Receiver
User Guide
DTP Systems
68-3852-01, Rev. A
10 24

Advertisement

loading
Need help?

Need help?

Do you have a question about the DTP3 T 311 and is the answer not in the manual?

Questions and answers

Related Manuals for Extron electronics DTP3 T 311

Summary of Contents for Extron electronics DTP3 T 311

  • Page 1 DTP3 T/R 311 HDMI Twisted Pair Transmitter and Receiver User Guide DTP Systems 68-3852-01, Rev. A 10 24...
  • Page 2 Safety Instructions Safety Instructions • English Instructions de sécurité • Français AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur le WARNING: This symbol, , when used on the product, is intended to produit, signale à l’utilisateur la présence à l’intérieur du boîtier du produit alert the user of the presence of uninsulated dangerous voltage within the d’une tension électrique dangereuse susceptible de provoquer un choc product’s enclosure that may present a risk of electric shock.
  • Page 3 安全说明 • 简体中文 警告： 产品上的这个标志意在警告用户, 该产品机壳内有暴露的危险 电压， 有触电危险。 注意： 产品上的这个标志意在提示用户, 设备随附的用户手册中有重 要的操作和维护(维修)说明。 关于我们产品的安全指南、遵循的规范、EMI/EMF 的兼容性、无障碍使 用的特性等相关内容， www.extron.com 敬请访问 Extron 网站 , ，参见 Extron 安全规范指南，产品编 www.extron.com 号 68-290-01 。 安全記事 • 繁體中文 안전 지침 • 한국어 경고: 이 기호 가 제품에 사용될 경우, 제품의 인클로저 내에 있는 警告: 若產品上使用此符號，...

  • Page 4: Fcc Class A Notice

    FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. The Class A limits provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 5: Software Commands

    Software Commands Commands are written in the fonts shown here: ^AR Merge Scene,,0p1 scene 1,1 ^B 51 ^W^C.0 [01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03] E X! *X1^* X2)* X2#* X2! CE} NOTE: For commands and examples of computer or device responses used in this guide, the character “0”...

  • Page 7: Table Of Contents

    Contents ............................... 1 Introduction About this Guide ................................1 About the DTP3 T/R 311 ..............................1 TP Cable Advantages ..............................2 Use and Compatibility with Other Extron DTP Products ....................2 Features ..................................3 ..........................5 Installation and Operation Rear Panel Connections and Features ..........................5 Transmitter Features ..............................6 Receiver Features ...............................7 Connector and Cable Details ............................8...
  • Page 8 DTP3 T/R 311 • Contents viii...

  • Page 9: Introduction

    This guide describes the Extron DTP3 T/R 311 long distance HDMI Twisted Pair Extender, which consists of a transmitter and receiver: • DTP3 T 311 — 230 feet (70 meters) transmitter • DTP3 R 311 — 230 feet (70 meters) receiver This guide describes how to install, operate, and configure the transmitter and receiver.

  • Page 10: Tp Cable Advantages

    Tx Rx G HDMI Tx Rx G HDMI DEVICES AUDIO DTP3 OUT DTP3 IN Extron Receiver DTP3 T 311 Transmitter CAT6A Cable up to 230' (70 m) POWER STANDBY Camera Figure 1. Typical DTP3 T/R 311 Application TP Cable Advantages Twisted pair cable is much smaller, lighter, more flexible, and less expensive than coaxial or HDMI cable.

  • Page 11: Features

    Analog stereo audio embedding — Analog stereo audio signals can be selectively embedded onto the digital video output signal and transported over DTP. The DTP3 T 311 can be set to pass the embedded digital audio, embed the analog audio, or to automatically embed the analog audio when no digital audio is detected.
  • Page 12 • Easy setup and commissioning with the Extron Product Configuration Software (PCS) — Conveniently configure multiple products using a single software application. • 1‑inch (2.5 cm) high, half rack width metal enclosure — With a low profile enclosure, the device can be installed discreetly wherever needed.

  • Page 13: Installation And Operation

    1.0 A MAX RS-232 AUDIO HOST HDMI Tx Rx G HDMI DTP3 OUT DTP3 T 311 G G G B B B C C C A A A F F F D D D E E E H H H...

  • Page 14: Transmitter Features

    Transmitter Features HDMI input port (see figure 2) — Connect an HDMI cable between this port and the HDMI output port (or DVI port, with an appropriate adapter) of the digital video source. The transmitter also accepts embedded digital audio on this port. HDMI NOTE: See LockIt Lacing Brackets...

  • Page 15: Receiver Features

    12 VDC power supply. RESET button — Press this button and observe the front panel Power LED (figure 8, ) to initiate two levels of DTP3 T 311 reset (see Reset Operations). Receiver Features DTP3 Input port and Send Power switch — Connect one end of the TP cable from the...

  • Page 16: Connector And Cable Details

    USB Device ports (see figure 2) — The built-in four port hub has female USB Type A connectors: two that are USB 2.0-compatible and two that are HID-compatible. USB 2.0 connectors can provide +5 VDC at up to 500 mA to connected USB peripherals requiring power.

  • Page 17: Audio Connectors

    ATTENTION: • Do not overtighten the HDMI connector mounting screw. The shield to which it fastens is very thin and can easily be stripped. • Ne serrez pas trop la vis de montage du connecteur HDMI. Le blindage auquel elle est attachée est très fin et peut facilement être dénudé.

  • Page 18: Supported Cables

    Over DTP3 connector wiring See figure 5 to properly wire the Over DTP3 connector. RS-232 Device Figure 5. Over DTP3 Connector Wiring NOTES: • The RS-232 Tx and Rx line pair must cross once between this connector and the source or destination. NOTES •...

  • Page 19: Cable Recommendations

    Cable recommendations Extron recommends using the following practices to achieve full transmission distances up to 230 feet (70 meters) and reduce transmission errors. • Use Extron XTP DTP 22 STP cable for the best performance. • At a minimum, Extron recommends 22 AWG, solid conductor, STP cable with a minimum bandwidth of 500 MHz.
  • Page 20 • This product is intended to be supplied by a UL Listed power source marked “Class 2” or “LPS,” rated output 12 VDC, minimum 1.0 A for DTP3 T 311 and minimum 2.8 A for DTP3 R 311. Always use a power supply supplied by or specified by Extron.

  • Page 21: Front Panel Connection And Indicators

    Front Panel Connection and Indicators INPUT SIGNAL HOST CONFIG HDCP DTP3 T 311 DTP3 T 311 A A A B B B C C C E E E INPUT DEVICES SIGNAL HOST CONFIG HDCP DTP3 R 311 DTP3 R 311...

  • Page 22: Basic Operation

    Basic Operation Configuration and Other Operations Simple Configuration and more complex operation of the system is accomplished via SIS commands (see Instruction Set Control), Extron Product Configuration Software (see Product Configuration Software), or embedded web pages (see HTML Pages). Reset Operations The rear panel button initiates two modes of reset.
  • Page 23 Performing a full factory reset Perform resets of the unit as follows (see figure 9): 1. Use a small screwdriver to press and hold the rear panel RESET button until the front panel Power LED blinks three times Power LED blinks Press and hold Release, then immediately three times.

  • Page 24: Remote Control

    Day, DD MM YYYY HH: MM: SS ] Login Administrator ] 60-nnnn-nn The DTP3 T 311 transmitter has completed its start-up and you are logged in as an Administrator. is the firmware version number and 0-nnnn-nn is the part number.

  • Page 25: Error Responses

    Error Responses When either DTP3 T/R 311 unit receives a valid SIS command, it executes the command and sends a response to the host device. If the Extender unit is unable to execute the command because the command is invalid or it contains invalid parameters, the unit returns an error response to the host.
  • Page 26 SIS Command Response Additional Description Command Function (Host to Unit) (Unit to Host) Audio output mute Mute audio output Applies to HDMI and DTP outputs Amt1 Unmute audio output Amt0 View mute status Verbose mode 2 or 3: Signal status •...
  • Page 27 SIS Command Response Additional Description Command Function (Host to Unit) (Unit to Host) Unit name • Set the unit name EX1) X1)] E • • Set the unit name to factory default DTP3 VIew unit name X1)] • Verbose mode 2 or 3: X1)] Verbose mode Set verbose mode...
  • Page 28 SIS Command and Response Table for Receiver SIS Commands SIS Command Response Additional Description Command Function (Host to Unit) (Unit to Host) Audio output format Set audio output format to auto Output follow inputs, digital preferred. O0AFMT AfmtO0 Set audio output format to digital Output digital audio.
  • Page 29 SIS Command Response Additional Description Command Function (Host to Unit) (Unit to Host) Firmware version Read firmware version X1@] Read full firmware version Read advanced firmware version USB signal host status VIew USB input host status IUSBC Verbose mode 2 or 3: UsbcI View USB output device status •...

  • Page 30: Product Configuration Software

    Starting the Program Start the Extron PCS as follows: 1. Click Start > Programs > Extron Electronics > Extron Product Configuration Software > Extron Product Configuration Software. The PCS opens to the Device Discovery screen. 2. Select TCP/IP (see figure 10,...
  • Page 31 NOTES: • The factory configured passwords for all accounts on this device have been set to the device serial number. In the event of a complete system reset, the passwords revert to the default. • The default username is admin and the default password is extron. •...

  • Page 32: Updating The Firmware

    3. Start the PCS and connect to the unit (see Starting the Program. 4. On the DTP3 T 311 or DTP3 R 311 tab, click > Update firmware > Update Firmware. The software asks you to confirm that you want to continue the...
  • Page 33 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4...

  • Page 34: Html Pages

    HTML Pages The transmitter or receiver can be controlled and operated through the front panel CONFIG (USB) port of either unit (see figure ). The Configuration port uses IP over USB technology. The factory-embedded pages are always available and cannot be erased or overwritten. Opening the Embedded HTML Pages Access the transmitter or receiver using HTML pages as follows: 1.

  • Page 35: Device Utilities Page

    4. Enter the Username (see figure ) and Password ( ) and click Sign In ( ). The browser opens the embedded web Settings page (see figure 16). NOTES: • The factory configured passwords for all accounts on this device have been set to the device serial number.

  • Page 36: Date & Time Page

    Date & Time page The Date & Time selection on the Device Utilities page (see figure 16) opens a read-only pane that shows date and time settings (see figure 17). Click EDIT ( ) to open an editable pane. 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1...
  • Page 37 NOTE: Or you can click the Datepicker ( ) or Timepicker ( ) icons (figure 18) and use those tools to set the date and time. Figure 18. Using Datepicker and Timepicker Tools DTP3 T/R 311 • Remote Control...

  • Page 38: Passwords Page

    Passwords page figure 16) opens a read-only pane that shows the The Passwords selection on the Device Utilities page (see Admin and User credentials of the unit (see figure 21). The Password can be edited by clicking the EDIT button ).

  • Page 39: Firmware Page

    Firmware page The Firmware selection on the Device Utilities page (see figure 16) opens a read-only pane that shows the status of the currently installed firmware (see figure 20), and provides a way to install new firmware. Firmware can be installed by clicking the EDIT button ( ).
  • Page 40 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Figure 22. Firmware Page with Firmware File Identified 4.

  • Page 41: Reference Information

    Reference Information Downloading PCS Software or a Firmware Update Package PCS and firmware update packages are available on the Extron website. Download as follows: NOTES: • This procedural description is illustrated as using Microsoft Edge. Depending on the browser you use, some steps or indications may be different.
  • Page 42 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Figure 25. Downloading PCS from the PCS Download Page 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Figure 26.
  • Page 43 1 1 1 1 1 1 1 1 B B B B B B B B C C C C C C C C 2 2 2 2 2 2 2 2 A A A A A A A A Figure 27.

  • Page 44: Mounting The Transmitter Or Receiver

    1 1 1 1 1 1 1 1 A A A A A A A A Figure 29. Package Download Notification (Firmware Shown) NOTE: Click the Subscribe link ( ) to receive an automatic e-mail notification if the package is updated. 8.

  • Page 45: Tabletop Use

    Tabletop Use Affix the included rubber feet to the bottom of the unit and place it in any convenient location. Mounting kits Mount the unit using any optional compatible mounting kit listed on the Extron website, in accordance with the directions included with the kit.

  • Page 46: Extron Warranty

    In no event will Extron Electronics be liable for direct, indirect, or consequential damages resulting from any defect in this product even if Extron Electronics has been advised of such damage.

This manual is also suitable for:

Dtp3 r 311