Downloading Firmware To A Pc - Extron electronics DTP2 T 201 D User Manual

Downloading Firmware to a PC

1.
Power on a computer connected to the same network as the transmitter.
2. On the Extron website, mouse over the Download tab in the menu bar along the top of
the page (see figure 18,
Figure 18.
3. Click Firmware in the drop-down list (
The Firmware page opens (see figure 19).
Figure 19.
4. Click the letter D from the alphabetic navigation bar (
5. Scroll down the page until you find the firmware for the DTP2 T 201 D.
6. Click Release Notes for more information about the program (optional).
7.
Click the Download link on the right.
8. Follow the on-screen instructions to download the firmware. Make a note of where the
firmware file is stored on the PC.
ATTENTION:
•
•
).
1
Locate Firmware for DTP2 T 201 D Transmitter
Firmware Page with Alphabetic Navigation Bar
The extension of the firmware file must be .s19. Opening a file with an
incorrect extension may cause the device to stop functioning.
L'extension du fichier firmware doit être .s19. Si un fichier est ouvert avec une
mauvaise extension, l'appareil peut arrêter de fonctionner.
DTP2 T 201 D Transmitter • Remote Configuration and Control
).
2
).
1
21