Software Requirements - Lattice Semiconductor POWR607 User Manual

Hide thumbs

Table of Contents

Introduction

Thank you for choosing the Lattice Semiconductor POWR607/6AT6 Evaluation Board!

This user's guide describes how to start using the POWR607/6AT6 Evaluation Board, an easy-to-use platform for

evaluating and designing with the Lattice Power Manager II devices, POWR607 and POWR6AT6. The Evaluation

Board

has

pre-loaded

POWR607/POWR6AT6 to review your own custom designs.

Note: Static electricity can severely shorten the lifespan of electronic components. See the POWR607/6AT6 Evalu-

ation Board QuickSTART Guide for handling and storage tips.

Features

• POWR607/6AT6 Evaluation Board - A 3.75 by 2.00 inches form factor that features the following on-board com-

ponents and circuits:

– Power Manager II ispPAC

– LEDs for general purpose I/O, power indicators, and watchdog timer interrupt indication

– Slide potentiometer

– USB B-mini connector for power and programming

– 2x14 expansion header for general I/O, voltage monitor inputs, and power supply trim outputs

– Push buttons for reset and watchdog timer trigger

– 4-bit DIP switch for watchdog timer period programming and reset pulse stretch enable

– JTAG and I

C header landings for JTAG cable programming and I

• Pre-loaded Processor Support Demo - The board includes a pre-loaded demo design that demonstrates watch-

dog timer, voltage supervisor, and reset generation features of the POWR607.

• USB Connector Cable - The POWR607/6AT6 Evaluation Board is powered from the mini B USB socket when

connected to a host PC with the included USB cable. The USB channel also provides a programming interface to

the POWR607/6AT6 and POWR6AT6 JTAG ports.

• QuickSTART Guide - Provides information on connecting the POWR607/6AT6 Evaluation Board, running the

pre-loaded processor support demo.

• POWR607/6AT6 Evaluation Board Web Page - Provides access to the latest documentation, demo designs, and

drivers for the kit. See

The contents of this user's guide include demo operation, programming instructions, top-level functional descrip-

tions of the evaluation board, descriptions of the on-board connectors, switches and a complete set of schematics

of the board.