Demo Setup; Hardware Requirements; Software Requirements - Lattice Semiconductor CrossLink-NX User Manual

3. Demo Setup

This section describes the demo setup.

3.1. Hardware Requirements

•
CrossLink-NX Voice and Vision Machine Learning Board, Rev. B
•
USB 3.0 A to Micro B cable (To load firmware in FX3 and to run demo using video visualizing tool), USB 2.0 A to
Micro B cable (to program Crosslink-NX VVML board)
•
Personal computer

3.2. Software Requirements

•
Lattice Radiant™ Programmer version 3 (Refer to
•
Cypress - EZ-USB FX3 Software Development Kit (Refer to
and-drivers/ez-usb-fx3-software-development-kit)
•
Video visualizing tool to see output, user can use one of below tool:
1. VLC Media Player: https://www.videolan.org/vlc/download-windows.html
2. Windows Camera APP: To use windows camera app user must change default webcam if other camera device is
connected to system. For more info user can follow steps mentioned in link:
us/windows/forum/all/how-to-change-default-webcam-in-windows-10/1e8377c8-4fd5-4e9c-8ab6-67913c5c8e0c.
3. AMCap: http://noeld.com/programs.asp?cat=video.
© 2022 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal.
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
FPGA-UG-02161-1.0
CrossLink-NX Background Segmentation Using VVML Board Demonstration
http://www.latticesemi.com/programmer)
https://www.cypress.com/documentation/software-
https://answers.microsoft.com/en-
User Guide
7