Section 4 Operation
Status Display
In
Ex
4-4
If desired, press
This icon is illuminated when the pump is running.
This icon is illuminated when the heater is on. The icon blinks when the
reservoir fluid temperature is close to the desired setpoint.
This icon is illuminated when the refrigeration is on. The icon blinks
when the unit is in the energy saving mode, the mode is explained later in
this section.
One of these icons is on to indicate which sensor is selected for tempera-
ture control, internal or external.
This icon is illuminated when serial communications is enabled.
This icon flashes when the circulator is in standby and its timer is enabled,
but the timer hasn't started.
The icon is on steady when the circulator is running and its timer is en-
abled, but the timer hasn't stopped.
to toggle between the Start and Status Displays.
In
Water
24.29°C
Status Display
Thermo Scientific