Table of Contents
Advertisement
11
Operating elements xCAD Server and xCAD Client
Description of Display xCAD Server
Description of Display xCAD Server
Shows actual
operating mode of
the system.
Temperature
measurement
Shows the TOC content in
systems equipped with
TOC monitoring. If TOC
feature is not equipped it
will read " - - ".
Switches to Nonstop
mode for dispensing.
Increases numerical
values in the menu.
The menu key brings you to the following system
parameters:
• Setting for the feedwater resistance
• Setting for the ultrapure water resistance
• UV lamp intensity and operating time
• Cartridge number and maintenance interval
• Rinsing
• Disinfection
• System errors display
• System errors print-out
• Unlocking the factory setting with your password.
GenPure
58
Display of the ultra pure
water resistance or
conductivity.
Decreases numerical
values in the menu.
Shows that the temperature
compensation is switched on.
Shows the ON/OFF status
of the UV lamp operating
mode and of the
temperature compensation.
Confirms prompts
and selections.
ON/OFF switch
UV Key for manual
operation of the UV lamp.
Also enables values to be
changed in the menu mode.
Thermo Scientific
Advertisement
Table of Contents
