Status Display; Stand By Mode - Thermo Scientific ADVANCED Series Quick Start Manuals

Status Display

Pump Running Symbol
Heater Running Symbol

Stand By Mode

Thermo Scientific
The SP1 and Menu portions on the top of the display are used to
view and/or change the circulator's settings. They are explained in detail
later in this Section.
In indicates the circulator is using its internal sensor for temperature
control. Ex indicates the circulator is using an external sensor for
temperature control.
If desired, press
Refrigeration Running
Symbol
Reservoir Fluid
Temperature
Note If no operator inputs are being made, the circulator automatically
switches to the Status Display after 60 seconds. If desired, change the
time or disable this feature using the
Press , the display goes blank and the circulator enters the stand
by mode. The blue LED illuminates.
to toggle between the Start/Status Displays.
Selected Reservoir Fluid
2 4 . 2 C
Status Display
Display Options
Section 4 Operation
Water
Menu.

4-3