Changing A Value Display - Thermo Scientific Premium PC 200 Manual

Section 4 Operation
Change a Value
Display
4-6
This display automatically appears when you request a change in value.
NOTE The unit does not need to be running to change a value.
• A cursor will appear on the left side of the entry window as shown
below.
• Press or
keys on the circular keypad to move the cursor back to the left
enter a negative value
0
1
2
3
4
• Press when the desired value is displayed.
NOTE The unit will beep if you try to enter a value outside the mini-
mum or maximum value or by trying to enter more than one negative
dash or decimal point..
to enter the corresponding digit. Use the arrow
of insert a decimal point
Setpoint
I
Minimum xxx
Maximum xxx
Change a Value Display


,
.
5
6
7
8
9
Thermo Scientific