System - Configuration
System - Run Time
System - Messages
System - Password
Thermo Scientific
Configuration
is used to view the unit's firmware version(s).
System
Configuration
Run Time
Messages
Run Time
is used to view the operating hours for the unit and its
components.
Messages
is used to view and, if desired, delete any stored messages.
The controller can store and display up to the last 10 Warning and last 10
Fault messages. Messages can be then deleted individually or as a group.
Password
is used if the unit needs a calibration or if the controller
PID values require changing. Changing the Password also allows you to
restore the controller to factory preset values. See Section 7.
System
Password
Section 4 Operation
4-23