Password; Operator Mode - Thermo Scientific Premium PC 200 Manual

Operator Mode

Thermo Scientific

Password

Section 7
Password is used to perform a calibration or to change the controller's PID
values. It is also used to reset the controller to factory preset values. To do
this the controller has to placed in the Operator Mode.
Configuration
Run Time
Messages
next to Password to display:
• Press
Level: User Password
• Press next to Password to display the Change a Value Display.
Change the Password to 1 and press
Level: Operator Password
• The controller is now in the Operator Mode.
System
Password
Password
to display:
Password
7-1