Table of Contents
Advertisement
Example:
In the diagram below, the following
conditions can be observed:
1.
Message Centre advises that the
lights are 'ON' in Auto Mode.
2.
Sub-menu advises that the vehicle
speed is 0 km/h.
3.
'Main Display' advises that the
distance to destination is 10 km.
4.
Cruise control is not selected.
5.
Transmission is in Park (P).
6.
Vehicle has travelled a total distance
of 1999 km.
If the driver wishes to change the 'Main
Display' to show current vehicle speed.
To do this, first the sub-menu must be
cycled through to 'Speed'.
This is done by toggling through the
menu with the up or down keys. In
this case, from 'Overspeed', the 'UP'
button needs to be pressed once.
The sub-menu now displays the word
'Speed' and the current speed in km/h.
Instrumentation
To bring the speed item into the 'Main
Display', the driver now pushes the
select 'SEL' button.
-73-
Advertisement
Table of Contents
