Table of Contents
Advertisement
To Set a Speed
With the cruise control enabled, press
either of the 'SET' switches located on
the steering wheel to set and store the
current vehicle speed.
The 'CRUISE SET' indicator (Green)
illuminates, a pop-up is displayed in the
main screen for two seconds and the set
speed is displayed.
The vehicle will now control to the set
speed (in this example 110 km/h).
Illuminated if CRUISE is enabled
Cruise Control
CRUISE SET speed
Speed Adjustment
The cruise control system provides
two methods for adjusting the set
speed.These are 'Coarse' and 'Fine'
adjustment.
Fine Adjustment
A fine adjustment is possible tapping
either SET+ or SET- . This adjusts the set
speed up or down by an increment of 1
km/h.
Coarse Adjustment ('Indexing')
A coarse adjustment is possible by
"indexing". To index press and hold either
SET+ or SET-.
Release when the set display rounds up
or down to the next 10 km/h increment.
If a further index is required, the process
is repeated. Examples of coarse
adjustment are featured on the next
page.
WARNINGS
When you are going downhill, your
vehicle speed may increase above
the set speed. The system does not
apply the brakes. Change down a gear
to assist the system in maintaining the
set speed. Failure to do so could result in
loss of vehicle control, serious injury or
death.
-135-
Advertisement
Table of Contents
