Ford FG X FALCON SEDAN 2015 Owner's Manual page 46

Arming
There are two options available for
arming the alarm system. Only one
option can be used at any one time.
• The system can be armed by
locking the vehicle using the lock
button on the remote keypad.
• The system becomes armed when
the ignition key is removed from the
ignition.
Either action initially enters the 'PRE-
ARMED' state prior to arming. (Refer to
'Operation' earlier in this section.) These
two features can be enabled or disabled
through the ICC 'Settings' menu.
Acknowledgement of arming is provided
by flash of the indicators and short chirp
of the siren. The acknowledgement
feature can be disabled through the ICC
'Settings' menu.
Disarming
The system can be
disarmed by unlocking
the vehicle using the
unlock button on the
remote keypad, or
when the ignition key
is inserted into the
ignition and turned
'ON'.
Locks and Security
Note: If the anti-theft alarm is armed and
the boot, bonnet or a door is opened,
a pre-trigger warning sounds from the
siren. At this point the system can be
disarmed by a remote key unlock or key
inserted into ignition and turned 'ON'
(depending on setting) If not performed
after twelve seconds, the siren sounds.
Alarm Trigger
When the anti-theft alarm is 'ARMED', it
can be triggered by any of the following
actions:
•
•
•
Disabling
The alarm can be completely disabled via
the Instrument Cluster settings (refer to
the 'Instrument Cluster' settings section
of this manual). This does not affect the
vehicle immobilisation system. In the
case of a siren malfunction, the vehicle
horn will substitute to give an audible
alarm or warning. The vehicle should be
taken to an authorised Ford dealer for
inspection and/or repair.
Alarm Acknowledgements
Disarm via Remote Unlock
Disarm after Breach
Arm
Alarm Cannot Arm (door,
boot or bonnet left open)
-44-
Doors, bonnet, boot opened.
Battery or siren disconnected.
Ignition transition without an
authorised key.
1 chirp/flash
3 chirps/flash
2 chirps/flash
Multiple chirps/
flashes