Table of Contents
Advertisement
Storing a New Mirror Dip Position
Note: The mirror-dip feature must first
be enabled according to your current
memory seat position one, two or three.
1.
Unlock the vehicle with your remote
key.
2.
Recall a memory seat position one,
two or three.
3.
Insert the key into the ignition and
turn to the 'ON' position.
4.
Select 'REVERSE' gear.
5.
The mirror will now automatically
move to the factory default dipped
position. This may take up to five
seconds. If it does not move,
check that the mirror dip feature is
enabled.
6.
As required, move the mirror to the
desired position using the mirror
controls.
7.
To store this position, press and hold
the original seat memory position
one, two or three, with reverse
gear selected and the ignition still in
the 'ON' position. A double chime
sounds to indicate successful
memory storage.
Note: If the vehicle is locked whilst the
mirrors are still moving, the new memory
position will not be stored.
Note: The mirror dip must be enabled
for each stored memory seat button one
two, or three.
Note: Once the vehicle is locked with
the remote, the current mirror, mirror dip
and seat position will be programmed to
the key.
Recalling a Mirror Dip Position
When unlocking the vehicle with the
remote, the mirror automatically moves
into a dipped position on engaging
reverse gear (if you have followed the
procedures on
enabling the factory
default mirror-dipped
mirror dip position outlined earlier in this
section).
To Enable Automatic Mirror Dip
1.
Turn ignition to 'ON' position.
2.
Select 'REVERSE' gear.
3.
When pressing the 'Mirror Dip'
button briefly, a single chime
sounds. This indicates that the
mirror dip feature is disabled. Press
and hold the 'Mirror Dip' button
for two seconds. A double-chime
sounds, indicating the feature is now
enabled.
To Disable Automatic Mirror Dip
1.
Turn ignition to 'ON' position
2.
Select REVERSE gear.
3.
When pressing the 'mirror dip'
button briefly, no chime will sound.
This indicates that the mirror dip
feature is enabled. Press and
hold the 'mirror dip' button for
two seconds. A double-chime will
sound, indicating the feature is now
disabled.
Automatic Dimming Interior
Mirror (if equipped)
Sensors at the front of the interior mirror
measure the intensity of incident light.
The mirror automatically changes to a
dimmed position or returns to its normal
state, depending on the light intensity.
A green light on the front of the mirror
indicates that the mirror is working.
-62-
or storing a new
Advertisement
Table of Contents
