Table of Contents
Advertisement
Using the Menu Screens
•
Press the 'MENU' (7) button to bring
up a list of customisable display
features.
•
Use the scroll up (3) and down
(4) arrows to locate the required
feature.
•
Press the 'SEL' (5) button to enable
adjustment or resetting of that
feature.
Set Dimming
Adjusts the intensity of the dial and
display illumination. There are separate
settings for daytime and nighttime
illumination.
Set Overspeed
Press the 'MENU' button, select
'SETTINGS' and 'SET OVERSPEED'.
Then press (or press and hold) up (3)
and down (4) arrows to select the
desired speed. Pressing 'SEL' (5) turns
Overspeed on and off.
Reset All
Pressing 'SEL' (5) puts all screen settings
to the factory default.
Set Dis to Dest
Press up (3) or down (4) arrows to
select the desired distance. The distance
displayed will then decrease as you
travel. Press and hold 'SEL' (5) to reset
distance to zero.
Reset All Trip
Press up (3) or down (4) arrows to move
through trip functions. Press 'SEL' (5) to
reset the selected function.
Warnings
Displays a list of current warnings. Press
Quick Start
up (3) or down (4) arrows to select
desired warning.
Settings
Press up (3) or down (4) arrows to move
through settings. Press 'SEL' (5) on the
currently highlighted setting to adjust or
turn on or off.
Sub-Content
Press up (3) or down (4) arrows to move
through sub content list.
Press 'SEL' (5) on the currently
highlighted item to enable or disable the
item in the sub-menu.
Full details on how to use the MFD are
found in the 'Instrumentation' section of
this manual.
UNLOCKING/OPENING
BOOT
To open the boot, press the boot
opening button which is located below
the Ford badge on the boot lid.
The boot opening button is only enabled
when the doors and/or the boot are
unlocked.
-13-
To unlock the boot, use
either the boot or door
unlock buttons on the
keypad. The boot can then
be opened using the boot
unlock button on the boot
decklid.
Advertisement
Table of Contents
