Table of Contents
Advertisement
Insert the screwdriver into the opening
at the side of the keypad container and
rotate it to start opening the container.
4.
Insert the screwdriver into the
opening at the front of the keypad
container and rotate it to open the
container completely. Be careful not
to lose the key ring.
5.
Insert the screwdriver into the
opening marked with an arrow
and carefully prise out the battery.
Take care not to touch the battery
contacts or the printed circuit board.
Locks and Security
6.
7.
8.
Non-Flip Key Battery
Replacement
Certain Falcon variants have a non-flip
spare key.
1.
2.
-39-
Insert a new 3V CR 2032 battery.
The positive contact of the battery
(marked with a +) must face
upwards.
Snap the two halves of the keypad
container back together.
Assemble the key blade component
and keypad container and press
firmly until they snap together.
Carefully separate the transmitter
unit from the key using a flat object
(for example, a screwdriver) in the
recess on the back.
Open the transmitter unit by
separating the retaining clips on the
sides with the flat object.
Advertisement
Table of Contents
