Cruise Control - Ford FG X FALCON SEDAN 2015 Owner's Manual

CRUISE CONTROL

WARNING
To avoid the possibility of loss of
control, the cruise control should
not be used in heavy traffic (city driving)
or on winding, slippery or unsealed
roads.
The cruise control system attempts to
maintain the vehicle speed set by the
driver. The system has a set speed
display in the MFD. When the cruise
control is set, it shows the speed the
cruise control is trying to achieve. When
in coast, it shows the previously set
speed.
Illuminated if CRUISE is enabled
The cruise control system has been
designed to allow easy setting to speed
'zones'. For convenience, there is an
indexing capability which adjusts the
set speed to the next speed zone up
or down as directed by the driver; for
example, 60 km/h, 70 km/h, 80 km/h
and so on.
Cruise Control
CRUISE SET speed
-134-
This function can also be controlled
using Voice Control. Refer to the SYNC
manual for further details.
To Enable Cruise Control
Place your fingers underneath the
'CRUISE' button and press towards you
to enable the cruise control system.
The MFD indicates
cruise control is enabled and ready to be
set.
The 'CRUISE CONTROL UNAVAILABLE'
pop-up may display if the cruise control
is not ready, or there is a fault in the
system.
CRUISE CONTROL
UNAVAILABLE
®
when the