Table of Contents
Advertisement
Adjusting the Lumbar Support
(if equipped)
Turn the hand wheel to adjust the lumbar
support.
Head Restraints
To raise, pull the head restraint up to the
desired position.
Seats
To lower, push the release button and
lower the head restraint to the desired
position. Make sure the head restraint
engages properly when in position.
The head restraint should be located so
that the top of the head restraint is level
with the top of your head for optimum
support, in the event of an impact.
To remove the head restraint, locate the
hidden release feature and press and
hold using a suitable tool, whilst raising
the head restraint.
To replace, press the button and push
the head restraint back into position.
Electrically Adjustable Seat
Base (if equipped)
To adjust the seat, push the
corresponding section of the adjustment
button in the desired direction of
adjustment:
•
Push forward to move seat forward.
•
Push backward to move seat back.
•
Lift up rear of switch to move rear of
seat base up.
-98-
Advertisement
Table of Contents
