Table of Contents
Advertisement
Refuelling EcoLPi Vehicles
WARNING
Carefully observe the filling
instructions and warnings
displayed at the filling station.
The LPG fill valve is located behind the
fuel filler flap.
In the unlikely event of an AFL
failure and tank overfill, (for
example, if the fuel bowser reads greater
than the usable volume* when filling from
empty), refer to the emergency
procedures for dedicated EcoLPi
vehicles in the 'Roadside Emergencies'
section of this manual.
CAUTION
A security feature will not allow the
fuel flap to open fully if the car is
locked. If you find difficulty opening or
closing the fuel flap, unlock the vehicle.
Applying undue force may damage the
fuel flap.
1.
Switch off the engine.
2.
Unscrew the LPG filler cap and
securely attach the LPG dispenser
nozzle to the fill valve.
3.
When filling is complete, disconnect
the LPG dispenser nozzle and
replace the LPG filler cap. Screw
down securely to prevent ingress of
dust or other foreign matter.
Fuel and Refuelling
* If the bowser indicates that the total
LPG volume has exceeded 87 litres
(that is, greater than the usable volume),
release the fuel dispenser handle. Fuel
tank volumes up to the usable litres
should accommodate most variables
such as temperature, bowser accuracy
and vehicle angle whilst filling.
Note: Refer to the 'Roadside
Emergencies' section of this manual for
information on emergency procedures
for EcoLPi vehicles.
-110-
Advertisement
Table of Contents
