Installing The Projector Lens - Christie Griffyn 4K32-RGB Installation And Setup Manual

Installing the projector lens

Only use lenses designed for Griffyn 4K32-RGB projectors. Installing a lens not designed for Griffyn
4K32-RGB, results in a warning that the lens is not present.
1. Remove the lens caps from the lens.
The packaging tape is required to ensure safe shipment of the projection lens to restrain the
zoom ring from rotating during shipping.
2. Align the guides on the front cover and the lens marked by a red line.
3. Insert the lens into the projector and turn it clockwise until you hear two clicks.
The first click indicates the safety lock mechanism has been engaged.
4. Continue to turn the lens clockwise until you hear a second click.
The second click indicates the lens is fully locked in position. The top center label should face
up and be aligned to the lens guide on the front cover.
Griffyn 4K32-RGB Installation and Setup Guide
020-103314-05 Rev. 1 (04-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Installation and setup
24