Installation And Setup; Site Requirements - Christie Griffyn 4K32-RGB Installation And Setup Manual

Installation and setup

Learn how to install, connect, and optimize the projector display.

Site requirements

To safely install and operate the Griffyn 4K32-RGB projectors, the installation location must meet
these minimum requirements.
Physical operating environment
• Ambient temperature (operating) 5°C to 40°C (41°F to 104°F)
• Humidity (non-condensing) 10% to 80%
• Operating altitude 0 to 3000 meters (0 to 9843 feet)
Product ventilation
Sufficient ventilation is required around the projector to regulate the temperature of the internal laser
module.
The installation site must provide an airflow 450 cubic feet per minute (CFM) at 1 to 1000 meters (3.3
to 3280.8 feet) elevation, and must accommodate a heat load of 3000 W.
For each additional 1000 meters (3280.8 feet) above sea level, increase the airflow (CFM) value by 15%.
If the increased airflow requirements cannot be met by the building's HVAC system, the operating
temperature range is restricted to 5°C to 25°C (41°F to 77°F) at a maximum altitude of 3000 meters
(9843 feet).
Power connection
Connect to AC power using the power cord provided with the projector.
This product is suitable for connection to an IT power distribution system.
Griffyn 4K32-RGB Installation and Setup Guide
020-103314-05 Rev. 1 (04-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
16