Video Results; Optical Power Results; Copper Results; Ac Voltage - JDS Uniphase SmartClass User Manual

Triple play services tester
Hide thumbs Also See for SmartClass:
Table of Contents

Advertisement

Table 42 Stream results (Continued)
Result
Delay Stats
Rate Stats

Video Results

This category reports the total number of active video streams and provides the combined total data
rate associated with the ATM Video Virtual Channel selected when configuring the ADSL interface
or the Ethernet port used in the Ethernet mode. The screen provides a quick summary of the total
data rates for all of the video program flows present on the interface under test.
The total video bandwidth (data rate) peaks can be important in analyzing total bandwidth available.
The total bandwidth is found on the ADSL Summary screen. The difference in the two numbers is
the bandwidth available for either Internet data or Internet data and VoIP data.
Table 43
Table 43 Total video rates results
Result
Active Streams
Current Combined Rate
Maximum Combined Rate
Average Combined Rate

Optical power results

The optical power is displayed as dBm or mW (depending on your selection on the Setup menu)
along with the Min, Max, and Average. The wavelength is displayed just under the power measure-
ment.
If using relative measurement mode, the received signal is compared to the reference value, and
displays the difference in dB. NOTE: If no reference value has been stored, 0.00 dBm will be used
as reference value.

Copper results

The copper results are described in the tables below.

AC voltage

You measure AC volts to:
June 2014
Description
The current latency and the maximum latency since the stream became active.
(Latency is the time to complete a program change, in
milliseconds.)
Reports individual bit rates for each portion of the video stream. The "IP
Total" statistics measure the bandwidth used by the video stream,
including the UDP and IP headers.
describes the video results.
Description
Number of active streams
The combined rate at this moment.
The maximum combined rate seen since the start of the test.
The average of all combined rates.
SmartClass TPS User's Guide
22035456, Rev 001
Chapter 16 Test Results
Optical power results
133

Advertisement

Table of Contents
loading

Table of Contents