JDS Uniphase SmartClass User Manual page 69

In Bridge mode, the SmartClass Triple Play Services replaces the modem, and hub, as indi-
cated by the dotted-line box in
IP addresses to other equipment. The end equipment uses either the service provider-
supplied IP address or one that is on the same network (same netmask).
NETWORK
Figure 10 DSL-Bridge circuit
To test in DSL Terminate Mode, use Bridge Mode as it allows VLAN tags to be assigned. To
use IPv6 (IPv6oE or IPv6 Multi VLAN), Bridge mode should be used.
June 2014
Figure
Service Provider IP,
for example, 10.1.1.x
DSLAM
SmartClass TPS User's Guide
22035456, Rev 001
10. It does not use a DHCP server so it does not assign
Customer Premise
Modem
Hub
SmartClass TPS
in DSL-Bridge mode
Chapter 6 DSL Testing
Specifying test settings
Ethernet
STB
10.1.1.x
51