JDS Uniphase SmartClass User Manual page 105

4 If you are using H.323 call control, press the right arrow to view the Gate Keeper Settings,
and then specify the settings.
The following table describes the settings.
Setting
Gatekeeper Mode
Gatekeeper IP
Call Control Port
RAS Port
Remote RAS Port
5 If you are using SIP call control, press the right arrow to view the Proxy Settings, and then
specify the settings.
The following table describes the settings.
Setting
Proxy Mode
Address Type
Proxy IP
Proxy Name
Proxy Port
Call Control Port
Proxy User name
Proxy Password
6 If you are using SCCP or MGCP, press the right arrow to view the Call Manager or Call Agent
settings, and then specify the settings.
The following table describes the settings.
Setting
Call Manager IP /
Call Agent IP
Call Manager Port /
Call Agent Port
June 2014
Description
Specify one of the following: No Gatekeeper means no RAS (registration,
admission, and status) messages will be used, Auto Discover uses a
well known IP address and port number, Static allows you to enter the
gatekeeper address
If the Gatekeeper mode is Static or Auto Discover mode, enter the IP
address of the Gatekeeper.
Enter the Call Control Port number.
This is a UDP port that is used for call control messages (for placing and
receiving calls).
Enter the port number of the Gatekeeper.
This is a UDP port that is used for registration (RAS messages).
Enter the Remote Call Control Port number.
Description
Specify whether the proxy uses a Static address or no proxy.
Select IP Address or DNS Name .
If Address Type is IP Address, enter the IP address of the proxy server.
This is the outbound proxy, or the device from which the SmartClass will
send and receive all SIP messages. If you have a network that uses one
server for registration and another for placing and receiving calls, the
Proxy IP specifies the address for placing and receiving calls ("Alias" on
the General Settings menu specifies the registrar address).
If Address Type is DNS Name, enter the DNS name of the proxy server.
Enter the port number of the proxy.
Enter the Call Control Port number.
Enter the Proxy User name
Enter the Proxy Password
Description
Enter the IP address of the Call Manager or Call
Agent .
Enter the Call Manager Port or Call Agent Port . The
range is from 1 to 65535.
SmartClass TPS User's Guide
22035456, Rev 001
Chapter 11 VoIP Testing
Specifying test settings
87