Table of Contents
Advertisement
2
Use the keypad to type the text.
– Repeated presses scroll through the selections for that key. For example, repeatedly
pressing the 2 key will scroll through A, B, C
and 2.
– To enter special characters, use either the asterisk/star or pound/hash key until the desired
character appears.
The same characters are available with both keys, but they scroll in opposite directions. This
is helpful if you scroll past the desired character because you can go back using the other
key rather than scrolling all the way back around.
– To cycle through upper/lower case and numeric entry, press the up arrow. This is indicated
in the upper right area of the screen with "abc, ABC, or 123".
– Use the down arrow to backspace (delete one character to the left).
– To move to the next field, either wait one second for the cursor to jump, or use the right
arrow key.
– If you move the cursor between characters, typing characters will insert new characters at
that location. To append characters, position the cursor at the end of your text, after the last
character.
Using a USB keyboard
If you connect a USB keyboard to the instrument, you can use it to navigate the menus and control
the instrument.
– Use the arrow keys to navigate.
– Use the numbered keys to select a menu item or for entering numbers.
– Use Enter as the OK key.
– Use Esc as the Cancel key.
– Use F5 key as the Utility key.
Customizing the user interface
The Utility key allows you to customize the user interface. For example, you can move more impor-
tant menu items up to the top of the screen, increase the font size, hide less important items, and
so on. Note: this feature is only available on list menus (tile menus cannot be customized).
To customize the interface
1
Navigate to the menu you wish to customize.
2
Press the Utility key, and then select Edit Menu.
June 2014
SmartClass TPS User's Guide
22035456, Rev 001
Chapter 1 Getting Started
Customizing the user interface
17
Advertisement
Table of Contents
Troubleshooting
