Viewing Test Results - JDS Uniphase HST-3000 User Manual

Chapter 2 Frame Relay Testing

Viewing test results

Viewing test results

38
6 Connect the HST to the circuit.
7 Press the Home navigation key.
8 To start the test, press the Restart soft key.
9 To view ping results, do the following:
a Press the Display soft key,
b Select Frame Relay, and then select Ping.
Connectivity testing is complete.
After you start a test, Summary test results automatically
appear. To view additional results, select a different test result
category.
To view test results
1 Configure and run a test.
– See "Generating traffic loads" on page 28
– See "Monitoring frame relay traffic" on page 23
2 Press the Display soft key, and then select Frame Relay.
A list of subcategories appear.
3 Select a subcategory.
The results for the category appear.
4 For other results, press the Display soft key, and then
select a different category.
For descriptions of test results, see
page 41.
HST-3000 Frame Relay Testing User's Guide
"Test Results" on