Night Service Group Extensions (#504) - Avaya Partner 18 Programming And Use Manual

Night Service Group Extensions (#504)

Description
This System Programming procedure assigns extensions to the Night Service
Group. When Night Service is on and a call comes in, all extensions in the Night
Service Group ring immediately, regardless of normal Line Ringing settings.
Related Features
You must use Night Service Button (#503) to program the button that is
used to turn Night Service on and off.
If you program a System Password (#403), when Night Service is on, users
in the Night Service Group can dial only numbers on the Emergency Phone
Number List (#406) and Marked System Speed Dial Numbers without
entering the System Password.
If you have a voice messaging system, lines that are assigned to the user's
phones in the Night Service Group are covered by the voice messaging
system depending on the status of VMS Hunt Delay (#506) and VMS Hunt
Schedule (#507).
Considerations
Do not include extensions connected to auxiliary equipment (PARTNER
Attendants, voice messaging systems, emergency phones, hotline phones,
or doorphones) in the Night Service Group.
A user in the Night Service Group can receive an after-hours outside call
only if it comes in on a line that is assigned to that user's phone.
(Extensions in the Night Service group can have different line assignments.)
Valid Entries
1 = Assigned to group
2 = Not Assigned to group
Programming
To change a Night Service Group assignment:
1. Press
display reads:
NS Group
Extension:
2. Enter the number of the extension to be programmed. For example, to
program extension 13, press
To assign or unassign the extension, press
3.
value displays.
To assign or unassign another extension, press
4.
extension number shows on the display. Repeat Step 3.
Select another procedure or exit programming mode.
5.
5-94
Night Service Group Extensions (#504)
Feature 0 0 System Program
1
System Program #
3
until the appropriate
Next Data
Next Item
The
5 0 4
or until the
Prev Item