Aa Extensions (#607) - Avaya Partner 18 Programming And Use Manual

AA Extensions (#607)

Description
This System Programming procedure identifies extensions where PARTNER
Attendants are connected to the system. Doing so lets the system notify users
with display phones when they are receiving a call that has been transferred
from the PARTNER Attendant. (This procedure applies only to PARTNER
Attendants—do not use it with the Automated Attendant Service of a voice
messaging system.)
Related Features
For each PARTNER Attendant extension, use Transfer Return Extension
(#306) to identify the extension to which a call should be routed if the
destination extension does not answer.
Set Automatic Extension Privacy (#304) to Not Assigned for the PARTNER
Attendant extension if you want to be able to intercept calls routed to the
device.
Considerations
Chapter 4 provides information on using PARTNER Attendants with the
system.
On system display phones, "AA" displays when a call is being transferred
from a PARTNER Attendant. "Transfer from AA" displays when a call
transferred by a PARTNER Attendant was not answered and is being
returned to your extension.
Valid Entries
1 = Assigned
2 = Not Assigned
Programming
To identify an extension where a PARTNER Attendant is installed:
1. Press
Feature
2. Enter the extension number to which the PARTNER Attendant is connected.
For example, to select extension 27, press
To assign or unassign the extension, press
3.
value displays.
4. To assign or unassign a second PARTNER Attendant extension, press
Next Item
Then repeat Step 3.
5. Select another procedure or exit programming mode.
5-2
AA Extensions (#607)
0 0 System Program
or until the extension number shows on the display.
Prev Item
System Program # 6 0
2 7
until the appropriate
Next Data
7