storage device from the system, the function
button becomes inactive (grey colour).
Now you can remove the SD card.
●
External data storage device in the
USB port
Depending on the country and device, there
might be one or several USB ports
vehicle.
The location of the USB ports
the vehicle in question .
Audio files on an external data storage device
connected to the USB port
can be played
and controlled via the Infotainment system.
Where this manual refers to external data
storage devices, this means USB mass stor-
age devices containing supported audio files,
such as MP3 players, iPods™ and USB sticks.
Only compatible audio files are displayed.
Other files are ignored.
The rest of operations to use the external da-
ta device storage (changing tracks, selecting
tracks and enabling playback modes) are
carried out similarly to other audio sources
›››
(e.g. "Playback from SD card"
Operating modes
Instructions and restrictions
The number of USB ports
patibility with Apple™ devices as well as with
other media players depends on the features.
The USB port
age of 5 volts for a USB connection.
Due to the large number of different data
storage devices and various iPod™ and
iPhone™ generations available, it is not possi-
in the
ble to guarantee fault-free operation of all
functions described here.
depends on
Take into account all other instructions and
limitations regarding requirements for media
sources.
Disconnecting
Connected data storage devices must be
prepared before their disconnection in order
to remove them.
Press the Infotainment button
●
then press
System settings
Select
●
Remove source safely
. After correctly ejecting the data
SD Card
storage device from the system, the function
button becomes inactive (grey colour).
Now the data storage device can be dis-
●
page
122.
connected.
and their com-
supplies the usual USB volt-
and
.
and then
Bluetooth® playback*
Connection of a safe audio source through
Bluetooth
Bluetooth® audio mode allows audio files
that are being played on a Bluetooth® audio
source (e.g. a modile phone) connected by
Bluetooth® through the vehicle's speakers
(Bluetooth® audio playback).
Requirements
The Bluetooth® audio source must be com-
●
patible with the A2DP Bluetooth® profile.
In the Bluetooth Settings menu the
●
BT Audio (A2DP/AVRCP) function
Starting Bluetooth® audio transmission
Switch on Bluetooth® visibility on the exter-
●
nal Bluetooth® audio source (e.g. mobile
phone).
Lower the base volume on the Infotainment
●
system.
Press the button
.
●
Press the
function button to select Blue-
●
tooth® as a media source.
Start searching for the desired Bluetooth®
●
device.
Please refer to the instructions on the
●
screen of the infotainment system and on the
Bluetooth® audio source regarding the rest of
the procedure.
must be on.
»
123