Seat Mii 2020 Owner's Manual page 142

Gear selection
Control lamps
It lights up red

There is a fault in the electrical system.
The instrument panel display shows the message
Error: Electr. Syst. Stop the vehi-
cle!
Stop the vehicle immediately as soon as it is

possible and safe, park it outdoors and disconnect
the drive system. Seek specialist assistance.
They light up red
 and 
The electrical system has overheated.
The instrument panel display shows the message
Electr. system overheated. Stop! Man-
ual!
Stop the vehicle immediately as soon as it is

possible and safe, park it outdoors and disconnect
the drive system. Do not pour coolant! Seek spe-
cialist assistance.
 and
They light up yellow

Brake energy recuperation is not possible.
The instrument panel display shows the message
Error: Recuperation. Check the man-
ual.
There is a failure in the brake energy recuperation.
Autonomy may be limited. Contact a specialised
workshop.
140
Driving
 and
They light up yellow

Limited braking capacity.
The instrument panel display shows the message
Error: Limited braking capacity.
The braking system does not work or has a fault.
Contact a specialised workshop.
 It lights up green
The engine will not start.
The brake pedal is not pressed when changing the
position of the selector lever from N. To change the
position of the selector lever, press the brake pedal.
 Flashes green
The lock button prevents starting to move.
The vehicle is prevented from moving forwards. The
selector lever locking button is not engaged.
Several warning and control lamps light up
for a few seconds when the ignition is switch-
ed on, signalling that the function is being
verified. They will switch off after a few sec-
onds.
WARNING
›››
Observe the safety warnings
trol and warning lamps on page
Gear selector lever
Gear selector lever
Fig. 137
The vehicle has a forward gear D/B and a re-
verse gear R.
The selector lever has a lock. To change the
selector lever from position P or N to another
position, switch on the ignition, press the
brake pedal and press the lock button on the
lever button in the direction of the arrow
›››
Fig. 137.

– Parking lock
The drive wheels are locked mechanically.
Select this position only when the vehicle is
stopped.
in Con-
66.

– Reverse gear
The reverse gear is engaged. Select this posi-
tion only when the vehicle is stopped.