Seat Mii 2020 Owner's Manual page 49

Fuses and bulbs
Fuses
Introduction
In general, a fuse can be assigned to various
electrical components. Likewise, an electrical
component can be protected by several
fuses.
Only replace fuses when the cause of the
problem has been solved. If a newly inserted
fuse blows after a short time, you must have
the electrical system checked by a special-
ised workshop as soon as possible.
WARNING
The high voltages in the electrical system
can give serious electrical shocks, causing
burns and even death!
Never touch the electrical wiring of the
●
ignition system.
Take care not to cause short circuits in
●
the electrical system.
WARNING
Using unsuitable fuses, repairing fuses or
bridging a current circuit without fuses can
cause a fire and serious injury.
Never use a fuse with a higher value. Only
●
replace fuses with a fuse of the same am-
Fuses and bulbs
perage (same colour and markings) and
size.
Never replace a fuse by a metal strip, sta-
●
ple or similar.
CAUTION
To prevent damage to the vehicle's electric
system, before replacing a fuse always turn
off the ignition, the lights and all electrical
elements and remove the key from the igni-
tion.
Note
In the vehicle, there are more fuses than
those indicated in this chapter.
Fuses inside the vehicle
On the driver side: the instrument pan-
Fig. 44
el fuse box cover.
On the driver's side underneath the in-
Fig. 45
strument panel: fuse box cover.
To open the instrument panel fuse box
Open the driver's door (front left).
●
Fit a flat object, i.e. a screwdriver, in the
●
›››
groove Fig. 44 and carefully lever to re-
move the cover.
Opening and closing the fuse box located
below the instrument panel
Open: Press the unlock button
●
until it is possible to open the cover. Fold the
cover down.
Close: Fold the cover up in the opposite di-
●
rection to the arrow until it clicks into the lock-
ing lever .
1
›››
Fig. 45
1
»
47