Seat Mii 2020 Owner's Manual page 171

Table of Contents

Advertisement

Remaining charging time
The vehicle's remaining charging time can be
displayed on the instrument cluster display
and on the mobile app (SEAT CONNECT
services).
The charge can take longer than 10 hours
with a charging cable for power sockets.
The e-Manager shows a maximum charging
time of 10:30 hours, although it can take lon-
ger.
If the charging time is longer than 10:30
hours, the instrument cluster displays >10:30.
When the remaining charge time drops below
this value, the ">" sign disappears and the
time counts down.
While the high-voltage battery is charging,
the indicator lamp
(yellow) flashes on the
instrument cluster.
Problems and solutions
The charging process will not start or has
paused
The relevant text message will appear in the
instrument panel display.
Use another charging source
Or: unplug the charging cable of the vehi-
cle and plug it back in again.
High-voltage battery
Or: the charging system may be faulty.
Contact a specialised workshop.
Fast charge is not working
The relevant text message will appear in the
instrument panel display.
It is not possible to fast charge using direct
current.
Error in the charging system.
Contact a specialised workshop.
As an alternative, charge the high-voltage
battery using alternating voltage (AC).
The charge time is longer when using the
fast charge function
The charging current automatically reduces
during the charging process.
The high-voltage battery must be protected
against overheating when performing several
continuous charging cycles, for example,
when using the vehicle on a continuous basis
and with high ambient temperatures.
Emergency release of the charging
connector
›››
page
160.
Requirements:
The parking lock P is not engaged
›››
page
140.
›››
The vehicle is unlocked
page
The charging process has ended or has
›››
paused
page
161.
If despite this, it is still impossible to unplug
the charging connector, perform an emer-
gency release of the connector.
Emergency release of the charging con-
nector
Press the charging mode button
bottom of the centre console and keep it
pressed. At the same time, press the central
locking button
located on the driver's door.
Remove the connector from the charging
socket.
Have the vehicle checked by a specialised
workshop immediately.
If the problem continues, consult a special-
ised workshop.
Note
Perform the emergency release of the
charging connector only in the event of a
fault in the vehicle.
69.
at the
169

Advertisement

Table of Contents
loading

Table of Contents