Seat Mii 2020 Owner's Manual page 53

Replacing the front bumper bulb
Right front wheel arch: access to the
Fig. 50
bulb
Changing the bulbs in the headlights
Fig. 51
Fuses and bulbs
Unscrew the 2 retaining screws of the wheel
●
›››
arch trim Fig. 50 (arrows) with the screw-
›››
driver from the vehicle took kit
Unscrew the expansive rivet in the lower
●
front part of the wheel arch trim
screwdriver from the vehicle tool kit and com-
›››
pletely remove it page 34.
Carefully fold the wheel arch trim to the
●
side.
›››
Release the connector Fig. 51
●
move it.
›››
Turn the bulb holder Fig. 51
●
tion of the arrow, in an anticlockwise direc-
tion as far as it will go and remove it, along
with the bulb, pulling backwards.
Replace the faulty bulb with a new identical
●
bulb.
Insert the bulb holder in the headlight and
●
turn it clockwise as far as the stop.
Plug the connector into the bulb holder.
●
1
The connector must audibly click into place.
Replace the wheel arch trim into its posi-
●
tion.
Place the expansive rivet in the wheel arch
●
trim and bumper and press it completely in-
›››
wards Fig. 50 .
A
Securely screw the 2 retaining screws
●
›››
Fig. 50 (arrows) with a screwdriver.
Changing the bulbs in the tail lights
page 34.
with the
A
and re-
1
in the direc-
On the side of the luggage compart-
Fig. 52
ment: remove the tail light unit.
»
51