Seat Mii 2020 Owner's Manual page 81

Table of Contents

Advertisement

The convenience indicators can be deactiva-
ted at a Specialised workshop.
Parking light on both sides
Switch the ignition off.
Place the light switch in position
Lock the vehicle from the outside.
In doing so, only the side lights of both head-
lights light up, and additionally the tail lights
will do so partially.
WARNING
Improper or lack of use of the turn signals,
or forgetting to deactivate them can con-
fuse other road users. This could result in a
serious accident.
Always give warning when you are going
to change lane, overtake or when turning,
activating the turn signal in good time.
As soon as you have finished changing
lane, overtaking or turning, switch the turn
signal off.
WARNING
Incorrect use of the headlights may cause
accidents and serious injury, as the main
beam may distract or dazzle other drivers.
Note
If the convenience turn signals are oper-
ating (three flashes) and the other conven-
ience turn signals are switched on, the ac-
tive part stops flashing and only flashes
once in the new part selected.
.
The turn signal only works when the igni-
tion is switched on. The hazard warning
lights also work when the ignition is switch-
ed off.
The main beam headlights can only be
switched on if the dipped beam headlights
are already on.
In cold or damp weather conditions, the
headlights, tail lights and turn signals may
mist up inside temporarily. This is normal
and in no way effects the useful life of the
vehicle lighting system.
"Coming home" and "Leav-
ing home" function
The "Coming home" and "Leaving home"
function lights up the vehicle's immediate
proximity when getting into and out of it in the
dark. When switched on, the front position
and dipped beam lights, tail lights and li-
cense plate light come on.
The "Leaving Home" is controlled by a photo-
sensor.
Lights
In the vehicle settings menu of the infotain-
ment system you can adjust the duration of
the light switch-off delay, and activate and
deactivate the function.
Activating the "Coming Home" function
mately 1 second.
When the driver door is opened, the "Coming
Home" lighting comes on. The delay in
switching off the headlights is counted from
when the last door or boot hatch is closed.
The "Coming Home" lighting turns off in
the following cases:
delay has elapsed.
rear lid is still open 30 seconds after starting
the engine.
sition
Activating the "Leaving Home" function
ted when the light switch is in position
and the light sensor detects darkness.
Switch the ignition off.
Activate the headlight flashers for approxi-
Automatically, once the headlight turn off
Automatically, when a vehicle door or the
When the rotary light switch is turned to po-
›››
page
77.
With the ignition is switched on.
Unlock the vehicle using the remote control.
The "Leaving Home" function is only activa-

»
79

Advertisement

Table of Contents
loading

Table of Contents