Table of Contents
Advertisement
Some menu options can only be read when
the vehicle is stationary.
The number of messages displayed on the in-
strument panel display will vary according to
the vehicle electronics and equipment.
A specialised workshop will be able to pro-
gramme or modify additional functions, ac-
cording to the vehicle equipment. SEAT rec-
ommends taking your car in for technical
service.
Instrument panel menus
›››
Multifunction display
■
Audio.
■
Telephone.
■
›››
Vehicle status
page
■
›››
Setup
page 62
■
Main menu
MFA: Information and setting options of the
●
›››
multifunction indicator
Vehicle status: Current warning and infor-
●
mation messages. This menu option only ap-
pears when there are messages of this type.
The number of existing messages is indicated
on the display. Example: 1/1 or 2/2
›››
page
59.
Settings: Different setting options, i.e. for
●
the time, language and units
64
WARNING
Distracting the driver in any way can lead
to an accident and cause injuries.
Never use the menus on the instrument
●
panel display while the vehicle is in motion.
Note
After loading or changing the 12-volt bat-
tery, check the system settings. If the pow-
er supply is interrupted, the system settings
might be incorrect or deleted.
page 61
Operation with the wiper lever
62.
page 61
Fig. 62
strument panel menus.
As long as a priority 1
active, it will not be possible to access any
›››
page
62.
menu. Some warnings can be confirmed and
hidden with the button
Operation
Wiper lever: buttons for using the in-
›››
page 62
warning is
›››
Fig. 62
.
1
Select a menu or an informative display
Switch the ignition on.
●
If a message or a vehicle pictogram is dis-
●
played, press the button
times if necessary.
To display the menus or to return to the
●
menu selection from a menu or from an infor-
mation displays, press and hold the rocker
switch
.
2
To change from one menu to another, press
●
the upper or lower part of the rocker switch.
To open the menu or the information dis-
●
play that is displayed, press the button
or wait a few seconds until the
1
menu or information display opens automati-
cally.
Changing menu settings
In the menu displayed, press the upper or
●
lower part of the rocker switch
quired menu option is checked. The option
appears framed.
Press the button
to make the de-
●
1
sired modifications. A mark indicates that the
system or function is activated.
Back to menu selection
Select Back on the corresponding menu to
exit.
; several
1
until the re-
2
Advertisement
Chapters
Table of Contents
