Tail light unit: remove the bulb holder
Fig. 53
Removing the rear light units
Open the rear lid.
●
Remove cover
by carefully levering it
●
1
›››
Fig. 52
.
Pull lock
on connector
●
3
›››
of the arrow
Fig. 52
the screwdriver from the vehicle tool kit.
Press fastener
and remove connector
●
4
›››
Fig. 52
.
›››
Unscrew wing nut
●
5
Remove the tail light from the bodywork by
●
carefully pulling backwards.
52
Disassemble the tail light unit and place it
●
on a flat, clean surface.
To change the bulb
Unlock the bulb holder on the locking flang-
●
es (arrow)
holder from the tail light.
Replace the damaged bulb with a new
●
identical bulb
Place the bulb holder in the tail light unit.
●
The locking tabs (arrow) must be heard to en-
›››
gage
Assembling the rear light units
Carefully insert the tail light unit into the
●
opening in the bodywork.
Hold the tail light in the installation position
●
with one hand and tighten the wing nut with
the other hand
Ensure that the tail light unit has been cor-
●
rectly fitted and is firmly secured.
Insert connector
●
in the direction
2
and press lock
. Help yourself with
rection opposite to the arrow
Insert the cover. The cover should lock into
●
2
place.
Close the rear lid.
●
Fig. 52
.
Emergencies
›››
Fig. 53
and remove the bulb
›››
Fig. 53
.
Fig. 53
.
›››
Fig. 52
.
5
into the bulb holder
2
on the connector in the di-
3
›››
Fig. 52
Changing the number plate bulb
In the rear bumper: detach the number
Fig. 54
plate light.
.
Number plate light: remove the bulb
Fig. 55
holder.
With one hand, press on the number plate
●
light from left to right and remove it from the
›››
bumper
Fig.
54.
Detach the number plate light carefully
●
from the bumper.