Seat Mii 2020 Owner's Manual page 105

Table of Contents

Advertisement

out. To get the best possible air flow towards
the windows, open the corresponding diffuser
and turn it to the de-icing/demisting position,
where it will lock.
There are other additional, non-adjustable air
vents in the instrument panel, in the footwells
and in the rear area of the passenger com-
partment.
Note
Food, medicine and other heat or cold sen-
sitive objects should never be placed in
front of the air outlets as they may be dam-
aged or made unsuitable for use by the air.
Air recirculation
Air recirculation mode prevents the ambient
air from entering the interior.
When the outside temperature is very high,
selecting manual air recirculation mode for a
short period refreshes the vehicle interior
more quickly.
For safety reasons, air recirculation mode is
switched off when the button
or the air distributor is turned to
Air conditioning
Switching the manual air recirculation
mode on and off
Press the button
nect manual air recirculation.
WARNING
Observe the safety warnings
duction on page
If the cooling system is switched off and
air recirculation mode switched on, the
windows can mist over very quickly, con-
siderably limiting visibility.
Switch air recirculation mode off when it
is not required.
CAUTION
Do not smoke when air recirculation is
switched on in vehicles with an air condi-
tioner. The smoke taken in could lie on the
cooling system vaporiser and on the acti-
vated charcoal cartridge of the dust and
pollen filter, leading to a permanently un-
pleasant smell.
Note
When reversing, and while the windscreen
is pressed
wipers are running, air recirculation is acti-
.
vated to prevent exhaust gases or unpleas-
ant odours from entering the passenger
compartment.
to connect or discon-
›››
in Intro-
100.
Note
If the temperature regulator is turned to the
coldest setting (blue point), the air recircu-
lation function and the
button are auto-

matically activated.
If the function is not deactivated by
pressing the button, it will deactivate after
approximately 20 minutes.
Seat heating*
With the engine on, the seat cushion and the
seat backrest can be heated electrically.
Control seat heating
Press buttons
or
on the control panel
to turn on the seat heating as high as possi-
ble.
Press buttons
o
repeatedly to adjust it
to the required level.
To turn off the seat heating, press button
or
repeatedly until no LEDs are lit.
When the seat heating is at the maximum lev-
el, after approx. 15 minutes it is automatically
adjusted to the first level.
Cases in which the heat seating should
not be switched on
Do not switch the seat heating on if any of the
following conditions are met:
»
103

Advertisement

Table of Contents
loading

Table of Contents