Always stop the engine, apply the hand
●
brake and put it in gear when using a man-
ual gearbox, in order to reduce the risk of
involuntary movement of the vehicle.
WARNING
A tyre filled with sealant does not have the
same performance properties as a conven-
tional tyre.
Never drive faster than 80 km/h
●
(50 mph).
Avoid heavy acceleration, hard braking
●
and fast cornering.
Drive for only 10 minutes at a maximum
●
speed of 80 km/h (50 mph) and then check
the tyre.
For the sake of the environment
Dispose of used or expired sealant observ-
ing any legal requirements.
Note
A new bottle of sealant can be purchased
at SEAT dealerships.
Note
Take into account the separate instruction
manual of the tyre mobility set * manufac-
turer.
36
Emergencies
Anti-puncture kit contents*
Standard representation: anti-punc-
Fig. 29
ture kit contents.
The anti-puncture kit is located underneath
the floor covering in the luggage compart-
ment. It includes the following components
›››
Fig.
29:
Valve insert remover
1
A sticker to be adhered to the instrument
2
cluster, within the driver's visual field, to
remind that the maximum advisable
speed "max. 80 km/h" or "max. 50 mph"
Filler tube with cap
3
Air compressor
4
ON/OFF switch
5
Air bleed screw (it can also be integrated
6
in the inflator tube).
Warning provided by tyre pressure moni-
7
toring system (it can also be integrated in
the inflator tube).
Tube for inflating tyres
8
12 volt connector
9
Bottle of sealant
10
Spare tyre valve
11
The valve insert remover
has a gap at
1
the lower end for a valve insert. The valve in-
sert can only be screwed or unscrewed in this
way. This also applies to its replacement part
.
11
Sealing and inflating a tyre
Sealing the tyre
Unscrew the tyre valve cap and insert. Use
●
›››
the
Fig. 29
tool to remove the insert.
1
Place it on a clean surface.
Shake the tyre sealant bottle vigorously
●
›››
Fig. 29
.
10
›››
Screw the inflator tube
Fig. 29
●
the sealant bottle. The bottle's seal will break
automatically.
Remove the lid from the filling tube
●
›››
Fig. 29
and screw the open end of the
3
tube into the tyre valve.
With the bottle upside down, empty all of
●
the contents into the tyre.
into
3