Seat Mii 2020 Owner's Manual page 174

CAUTION
Follow the manufacturer's instructions and
indications when using the charging sta-
tion.
Note
Charging with a 16 A charging cable is not
possible in some charging stations that
support 32 A. This depends on the features
of the charging station.
Before charging the vehicle, find out
●
about the available charging technology.
Charging cable for power sockets
Charging cable for electrical sockets
Fig. 157
172
Practical tips
On the charging cable for power
Fig. 158
sockets: protection device.
›››
Key to the Fig. 158:
Control lamp of the power connector
1
Control lamp of the protection device
2
Control lamp of the vehicle
3
Failure warning lamp
4
The supplied charging cable is for charging
the high-voltage battery using alternating
voltage (AC) from a power socket
›››
page 164.
Also bear in mind the safety information and
indications on the charging cable label.
Protection device
Due to the electronic protection device
›››
Fig. 158, the charging connector does not
receive current until it is plugged into the
charging socket of the vehicle. When the
charging cable is plugged into the power
socket, the protection device automatically
performs a self-check. The control and warn-
ing lamps then briefly light up and turn off.
Then the current operating status is dis-
played.
Operating displays
The control lamps that indicate the operation
turn on or flash green.
Display
Meaning
›››
Fig. 158
Charging cable connected
on
1
to the electrical network.
, on, flash- High-voltage battery
1 2 3
es a) charging.
Charging process com-
, and on plete. The high-voltage bat-
1 2 3
tery is charged.
a)
The available supply voltage depends on each
country.
Display in the event of the charging cable
heating
The charging cable is fitted with a tempera-
ture supervision system. The temperature su-
pervision is activated if the charging cable is
too hot due to, for example, overheating in the
luggage compartment where it is stored or
exposure to intense solar radiation.