The volume of the traffic announcements
●
can be changed with the volume control
This setting will also apply for subsequent an-
nouncements.
A pop-up message appears that allows
●
you to cancel the traffic announcement
( Cancel ) or deactivate the TP function ( De-
).
activate
Changing frequency band
The frequency band selected (FM, AM
1)
DAB
) is shown on the top left.
In Radio mode, press the
●
button briefly to display the
FM
›››
1)
function buttons
Fig.
110.
DAB
Press one of the function buttons
●
or
to change the frequency band.
DAB
OR: Press the
equipment button a few
●
times to cycle through the different lower
function buttons.
1)
This depends on the country and unit in ques-
tion.
Operating modes
Changing station
.
Go to the next available station with
Fig. 113
the arrow buttons.
1)
or
equipment
1)
,
and
AM
,
FM
AM
Changing the stations with the arrow
Fig. 114
buttons is only possible for saved stations.
Press the
●
tem or the display.
Based on the mode selected for the search
mode ( Arrow buttons: ) you can cycle
through either available or saved stations.
or
arrow button on the sys-
Manually tuning a station frequency
To select the desired frequency band
●
›››
page
115.
Press the function button of the frequency
●
band
.
Rotate the setting button until the desired
●
frequency is shown on the display
(e.g. 89.9 MHz ).
OR: Press one of the double-arrow buttons
●
›››
Fig. 116
until the frequency is shown on the
screen.
117