Seat Mii 2020 Owner's Manual page 40

Changing a wheel
What to do first
Park the vehicle on a horizontal surface and
●
in a safe place as far away from traffic as
possible.
Apply the handbrake.
●
Switch on the hazard warning lights.
●
Position the selector lever in N or P.
●
Keep the vehicle tool kit
●
the spare wheel* available.
Observe the applicable legislation for each
●
country (reflective vest, warning triangles,
etc.).
All occupants should leave the vehicle and
●
wait in a safe place (for instance behind the
roadside crash barrier).
WARNING
Always observe the above steps and pro-
●
tect yourself and other road users.
If you change the wheel on a slope, block
●
the wheel on the opposite side of the car
with a stone or similar to prevent the vehi-
cle from moving.
38
Integral wheel trim
›››
page 34 and
Fig. 30
The wheel covers must be removed for ac-
cess to the wheel bolts.
Removing
Take the wheel brace and the wire hook
●
from the vehicle tool kit
Hook the wire through one of the grooves of
●
the trim.
Insert the box spanner through the hook,
●
rest it on the tyre and remove the wheel trim
›››
Fig. 30.
Fitting
Press the trim against the wheel so that the
●
hole for the valve fits over the tyre valve.
Make sure that the trim is correctly fitted all
●
the way around the wheel. If you are using an
Emergencies
Remove the wheel cover.
›››
page 34.
anti-theft wheel lock, screw it in the opposite
position to the valve.
Wheel bolt caps*
Wheel: wheel nuts with caps.
Fig. 31
Removal
Fit the plastic clip (vehicle tools
●
over the cap until it clicks into place
›››
Fig. 31.
Remove the cap with the plastic clip.
●
The caps protect the wheel bolts and should
be remounted after changing the tyre.
The anti-theft wheel locking bolt has a
special cap. This only fits on anti-theft locking
bolts and is not for use with standard wheel
bolts.
›››
Fig. 28)