Turn the bulb holder with the bulb anti-
●
clockwise and remove it in the direction of
›››
the arrow
Fig.
55.
Replace the faulty bulb with a new identical
●
bulb.
Place the bulb holder in the number plate
●
light and press in the opposite direction to the
›››
arrow as far as possible
Fig.
Insert the number plate light carefully into
●
the left edge of the opening on the bumper.
During this process, check that the assembly
direction of the number plate light is correct,
i.e. the spring must be on the right.
Insert the number plate light into the bump-
●
er until it audibly clicks into place.
Replace the side turn signal bulb
Removing the side turn signal
Fig. 56
55.
Side turn signal: Bulb replacement.
Fig. 57
With one hand move the side turn signal
●
›››
backwards
Remove the side turn signal from the chas-
●
sis by leverage
Remove the bulb holder with the bulb in the
●
direction of the arrow
Remove the bulb holder bulb in a straight
●
direction.
Replace the faulty bulb with a new identical
●
bulb.
Install the bulb holder.
●
Place the side turn signal on the chassis on
●
the side situated towards the rear of the vehi-
cle until the spring clicks into the other side of
the side turn signal.
Fuses and bulbs
Fig. 56
.
1
.
2
›››
Fig. 57
.
1
Additional brake light
Taking into account that it consists of LED
bulbs, the change should be made at a tech-
nical service centre.
53