Seat Mii 2020 Owner's Manual page 116

Menu option: submenus with repercussion
Show clock in standby mode
device is turned off, the current time is shown on
the display.
: Here you can select marking colours for
Colour
the screen.
: Here you can manually set the desired
Language
language for the user interface. Alternatively, you
can let the instrument panel language be automati-
cally selected.
:
Bluetooth
: Press to switch off Bluetooth®. All
Bluetooth
existing connections are disconnected.
: Switch Bluetooth® visibility on and
Visibility
off.
: Bluetooth® visibility is switched on.
Visible
: Bluetooth® visibility is switch-
Not visible
ed off. Bluetooth® must be switched on for
pairing a Bluetooth® device with the infotain-
ment system.
: Display or change the name of the
Forename
device. This name will be displayed to other Blue-
tooth® devices in their Bluetooth® settings.
: Viewing paired devices.
Paired devices
Switching Bluetooth® devices and individual
Bluetooth® profiles on and off.
Searching for a device
Bluetooth® devices that are within range of the
infotainment system. The maximum range is ap-
prox. 10 meters.
114
Infotainment System
Menu option: submenus with repercussion
: When the
BT Audio (A2DP/AVRCP)
dio source is to be connected to the infotainment
system via Bluetooth®, this function must be
switched on
Application connection
Data transfer active
Registry
Remove source safely
can safely remove an inserted SD card or a connec-
ted USB device.
Factory settings
settings of Radio , Media , Sound and System
separately or together.
System information
of the device.
Copyright
a)
Valid only for the FM frequency band.
b)
This depends on the country and device in ques-
tion.
Operation of speed-dependent volume in-
crease
The speed-dependent volume increase func-
tion automatically adjusts the volume based
on the speed of the vehicle.
: Search for visible
The volume increase can be adjusted in lev-
els from 1 to 7 .
: If an external au-
›››
page 123.
: With this option you
: You can restore the factory
: Status of technical data
: Data of the software used.
If the selected level is low, the volume only in-
creases slightly when the speed increases, if
on the contrary it is high, the volume increa-
ses considerably. On 0 the speed-dependent
volume increase is disconnected.
operation
DAB-FM LINK
If the DAB station being listened to can no
longer be tuned in (e.g., there is no DAB cov-
erage), the device will try to find and tune the
same station on the FM frequency band.
To allow automatic station tracking on all fre-
quencies, the DAB station and the FM station
need to broadcast the station identification,
or to signal through DAB which FM station
corresponds to the same DAB station.
When the corresponding FM station has been
found, (FM) is displayed behind the name of
the station. If the corresponding DAB station
becomes available again, it returns to DAB
mode after a while.
If the signal is too weak and the DAB station in
question cannot be found again in the FM
band, the radio sound is muted.