Seat Mii 2020 Owner's Manual page 41

Table of Contents

Advertisement

Anti-theft wheel nuts
Anti-theft wheel bolt with cap and
Fig. 32
adapter.
Loosening the anti-theft wheel bolt
Remove the wheel cover* or the cap*.
›››
Insert the special adapter
Fig. 32
›››
hicle tools
page
34) onto the anti-theft
wheel bolt and push it on as far as it will go.
Insert the wheel brace (vehicle tools) onto
the adapter as far as it will go.
›››
Remove the wheel bolt
page
Note
Make a note of the code number of the an-
ti-theft wheel bolt and keep it in a safe
place, but not in your vehicle. If you need a
new adapter, you can obtain it from the
SEAT Official Service, indicating the code
number.
Loosening wheel bolts
Wheel change: loosen the wheel nuts.
Fig. 33
(ve-
1
39.
Wheel change: tyre valve
Fig. 34
correct position for the anti-theft wheel locking
bolt
or
.
2
3
Use only the wheel wrench belonging to the
car to loosen the wheel bolts.
Loosen the wheel bolts only about one turn
before raising the vehicle with the jack.
Self-help
and the
1
If the wheel bolt is very tight, carefully push
on the end of the wheel wrench with your
foot. Hold on to the vehicle for support and
take care not to slip during this operation.
Loosening wheel bolts
Fit the wheel wrench on as far as it will go
›››
Fig.
33.
Hold the wrench at the end and rotate the
bolt approximately one turn anticlock-
›››
wise
.
Important information about wheel bolts
Factory-fitted rims and wheel bolts are spe-
cially matched during construction. There-
fore, if different rims are fitted, the correct
wheel bolts with the right length and heads
must be used. This ensures that wheels are
fitted securely and that the brake system
functions correctly.
In certain circumstances, you should not even
use wheel bolts from vehicles of the same
model.
In wheels with full hubcaps, the anti-theft
locking bolt must be threaded onto positions
›››
Fig. 34
or
, taking the tyre valve's po-
2
3
sition as reference
. Otherwise it will not be
1
possible to mount the hubcap.
WARNING
If the wheel bolts are not properly tight-
ened, they could come loose while driving
»
39

Advertisement

Table of Contents
loading

Table of Contents