GE Vivid T8 Basic Service Manual page 119

Setup connection to a DICOM server (continued)
Vivid T8/ Vivid T8 Pro – Basic Service Manual
5490863-100 English Rev. 03
6. Follow the steps below to change the IP-address settings:
a. From the IP-Address pull-down menu, select <Modify>
to display the IPs dialog.
Figure 3-28. Select <Modify>
b. Select the server that need to modify from the IPs dialog
and then select Modify.
Figure 3-29. Select the server to modify
c. Edit the Name and/or the IP address of the server.
Figure 3-30. Edit Name and/or Ip address
d. Select OK to save the new settings and close the
dialog.
Select Cancel to close the dialog and return to the
DICOM Properties dialog.
Connectivity setup
3-43