GE Vivid T8 Basic Service Manual page 140

System Setup
Create new dataflow with Worklist and DICOM Storage (continued)
NOTE:
3-64
If the site has intergrated EchoPAC PC and CA-1000,
enable Allow SR and Allow SR Private Data. Signed
Doppler Velocities is disabled by default. This means that
signs for Doppler Velocities are removed in the DICOM SR.
8. If this dataflow should be the default at start-up, enable
Default for the dataflow.
Vivid T8/ Vivid T8 Pro – Basic Service Manual
5490863-100 English Rev. 03