GE Vivid T8 Basic Service Manual page 133

Export to MPEGVue configuration
NOTE:
Vivid T8/ Vivid T8 Pro – Basic Service Manual
5490863-100 English Rev. 03
1. Select the eVue device in the Selected devices pane and
press Properties.
The eVue properties window is displayed.
Figure 3-44. The MPEGVue properties window
2. Select a removable media or a network volume remote path
as the destination in the Destination pull-down menu.
Remote paths of network volumes must be entered once in
the Remote path field before they can be selected from the
Destination Pull-down menu.
3. Check the options as required.
4. Select OK and press Config.
Connectivity setup
3-57