Displaying the Firmware Version
You can display the camera's firmware version. Use this
information when consulting a service representative
about the camera.
3, 4
1
Display the SETUP screen.
For details on displaying the SETUP screen, see
"Displaying the SETUP Menu" on page 28.
2
Select FIRMWARE VERSION by pressing the v
or V control button.
3
Press the ENTER button.
The FIRMWARE VERSION screen appears.
4
Press the ENTER button.
The SETUP menu reappears.
43
Menu
Locking the Camera Menus
You can keep menu screens from displaying even when
the MENU button is pressed during Shooting or
Playback. This can prevent accidental changes to menu
settings.
To lock the menus
Press the MENU button for at least five seconds. The
menu screen disappears, and the lock icon
This icon indicates that the menus are now locked and
pressing the MENU button will not display the menu
2
screen.
The menus remain locked even when you switch
between Shooting and Playback modes or turn the
power off.
To release the menu lock
Press the MENU button for at least five seconds. The
lock icon
disappears, and the menu screen appears.
appears.