Table of Contents
Advertisement
Type-N Connector Assembly
7. emove the three screws (item 6) from the bottom edge of the front frame that secure the
connector bracket. emove the connector assembly (item 7).
Replacement
everse the order of the removal procedure.
Note
When reconnecting semi-rigid cables, it is recommended that the connections
be torqued to 10 in-lb.
14-18 Assembly Replacement and
Post-Repair Procedures
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
RAFT
3/21/106 15:15
Advertisement
Chapters
Table of Contents
Troubleshooting
