HP 8753D Option 011 Service Manual page 279

HP-IB ervice Mnemonic Definitions
All service routine keystrokes can be made through HP-IB in one of the following approaches:
sending equivalent remote HP-IB commands. (Mnemonics have been documented previously
with the corresponding keystroke.)
invoking the ystem Menu (MENU Y T) and using the analyzer mnemonic ( OFTn),
where \n" represents the softkey number. ( oftkeys are numbered 1 to 8 from top to
bottom.)
An HP-IB overview is provided in the \Compatible Peripherals" chapter in the
HP-IB programming information is also provided in the
Invoking Tests Remotely
Many tests require a response to the displayed prompts. ince bit 1 of the Event tatus
Register B is set (bit 1 = service routine waiting) any time a service routine prompts the user
for an expected response, you can send an appropriate response using one of the following
techniques:
Read event status register B to reset the bit.
Enable bit 1 to interrupt (E NB[D]). ee \ tatus Reporting" in the Programming Guide.
Respond to the prompt with a TE Rn command (see Tests Menu, at the beginning of this
chapter).
Symbol Conventions
[ ] An optional operand
D A numerical operand
< >
A necessary appendage
j
An either/or choice in appendages
Analog Bus Codes
10-40 Service Key Menus and Error Messages
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
User's Guide
Programming Guide
.
3/21/106 15:14
.
RAFT